Description of GeraCut Pro-line- Cut posters and photos automatically

• Is a large part of your work process trimming your prints manually? And do you think you could use that time more constructively? Then we couldn't agree more.
  Now you can drastically streamline your workflow by using GeraCut Pro-line automatic X and Y cutter.
  
  This product line contains two products, the GeraCut 210 and GeraCut 220 respectively.
  The difference between these two is the format size.
  The GeraCut 210 can handle formats up to 36" (91.4 cm), where the GeraCut 220 can handle formats up to 40" (102 cm).
  
  These XY trimmers are designed to trim all four sides of the print simultaneously, and the job is done quickly and accurately. The trimmers must be fed manually, but it is able to prepare 10x 50x70 posters in under a minute, which is the significant time saving compared to trimming the print manually.
  They are removable, and can work independently from the printer, so you can trim your prints while the printer is making new ones.
  The trimmers have a high ease of use with its plug and play, while being extremely easy to maintain.
  
  Unlike virtually all other XY cutters on the market, they don't require you to print from e.g. a Calderea RIP or printer with cutting marks.
  Thus, your cost to get started with XY trimming becomes just the machine. This is a very big plus, because then you can stay on your current print setup without making adjustments. If you currently print from e.g. Mirage, you can continue with this without any problems.
  
  When you need to set it for the cut size, you have to manually set the width (Y), but the horizontal cut (X) is done automatically.
  You can easily trust the accuracy of dens trimming, as well as have it standing near your workstation without being interrupted by noise, as the noise level is minimal during trimming.
  
  The trimmers come with an innovative touchscreen, which allows you to make the set-up of the trimming completely optimal.
  

  How much time do you save

  
  When manually trimming a 50 x 70 cm print on a Dahle cutting machine, it takes about 1 minute from the time you start trimming until the print is ready for mounting.
  When using the CeraCut pro-line, this process is made as much as 10 times more efficient. In addition to the great time efficiency, your prints are also all cut perfectly and uniformly, which is not always the case with manual trimming.
  

  What material can they cut

  
  - Coated paper
  - Photo paper
  - CAD paper
  - PP media
  - Vinyl
  - Poster paper
  - Fine Art paper
  
  The product cannot handle textile media
  

  Return of Investment

  
  This calculation is made based on an employee's hourly rate of 200 DKK per hour, and that you as a company need to have 100 prints trimmed per day. If the employee's hourly rate is lower and your production of posters or similar is lower, the ROI will obviously be longer.
  
  This gives an ROI of 323 days.

• Product video

  
  
  
  

  Specifications GeraCut 210

  
  Document
  - Thickness: up to 0.5 mm
  - Length: Min 250 mm - Max unlimited
  - Width: Min 250 mm Max 920 mm (36")
  - Media weight: 60-200 g/m2
  Speed
  - Up to 12m/min
  Sound level
  -70 dBa
  Weight
  - 125 kg
  Power consumption
  - 50 /60 Hz 265W
  Warranty
  - 12 months
  
  

  Specifications GeraCut 220

  
  Document
  - Thickness: Up to 0.5 mm
  - Length: Min 250 mm - Max unlimited
  - Width: Min 250 mm Max 1020mm (40")
  - Media weight: 60-200 g/m2
  Speed
  - Up to 24m/min
  Noise level
  -72 dBa
  Weight
  - 135kg
  Power consumption
  - 50 /60 Hz 265W
  Warranty
  - 12 months
  
  
  

  Full service and support

  
  
  We at Grafisk-Handel have over 50 years experience in the industry, making us experts in the field.
  Therefore, we offer free telephone support for all products purchased from us throughout the life of the product!
  So if you have any doubts or problems, please contact us by email or phone.
  
  

  See your delivery time